FCC ID: 2AOMDCTX01
FCC Statement:
Manufacturer name: RC4WD Inc.
Company address:
720 N. Gateway St. Visalia, CA 93291
Contact information: [email protected]
Applicable environment: Toy
Frequency range: 2.4GHz
Transmit power: Below 100mW
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
NOTE: Modifications to this product will void the user’s authority to operate this equipment.
RF Exposure Warning:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
And should be operated with minimum distance of 20 cm between the antenna & your body.
The associated regulatory agencies of the following countries recognize the noted certifications for this product as
authorized for sale and use.
This is an advanced hobby grade product. It must be operated with caution and common sense. Basic mechanical
aptitude is required to operate this model: Failure to operate this product in a safe and responsible manner could
result in injury, damage the product or other properties. This product is not intended for use by children without direct
adult supervision. The product manual contains instructions for safe operation and maintenance. It is essential to
read and follow all the instructions and warnings in the manual prior to assembly, setup and use, in order to operate
correctly and avoid damage or injury.
As the user of this product, you are solely responsible for operating it in a manner that does not endanger yourself
and others or result in damage to the product or the property of others.
This model is controlled by a radio signal that is subject to interference from many sources outside your control. This
interference can cause momentary loss of control so it is necessary to always keep a safe distance in all directions
around your model, as this will help to avoid collisions or injury.
• Always operate your model in an open area away from cars, traffic or people.
• Avoid operating your model on the street where injury or damage can occur.
• Never operate the model on a busy street or populated areas for any reason.
• Never operate your model with low transmitter batteries.
• Carefully follow the directions, warnings for this product and any optional support equipments (chargers, recharge-
able battery packs, etc.) that you use.
• Keep all chemicals, small parts and anything electrical out of the reach of children.
• Moisture causes damage to electronics. Avoid water exposure to all equipment not specifically designed and
protected for this purpose.
Introduction
Safety, Precautions and Warnings
CE Compliance Information for The European Union
UK DE DK BG SE CZ ES NL SK HU RO FR PT
FI EE LV LT PL AT CY SI GR MT IT IE LU
9
