RC4Magic Series 3 DMXio User Manual
Page 12
RF Power/RSSI - Red
In transmitter mode, this LED indicates the strength of the RF signal. It blinks faster with
higher power levels.
In receiver mode, this LED is a receive signal strength indicator (RSSI). Faster blinking
indicates a stronger more robust signal.
DMX Channel Range Limit - Yellow
If the range of transmit channels has been reduced (Transmit Low Channel is higher than 1,
or Transmit High Channel is lower than 512) then this indicator is on. This is a warning that
not all channels are being transmitted.
DMX Termination - Green
If DMX termination is enabled, this indicator is on and an internal terminator is applied to
the XLR connections.
RF Connect - Blue
In transmitter mode, this indicator blinks slowly when a private local-area wireless network
is established.
In receiver mode, this LED is solidly lit (no blinking) while it searches for a transmitter on
the associated RC4 System ID. When a valid transmitter is found and a private local-area
wireless network is established, this LED blinks at double the speed of the transmitter LED.
If no valid data is received from the transmitter for several seconds, the receiver radio is reset
and this LED reverts to being solidly on. It then remains on until a valid transmitter is found
again. This sequence of events is what occurs if a transmitter is turned off and on and locates
itself on a different RF channel.
