P R O G R A M M I N G
If you are using the Cessna 182 UMX board
(EFLU5864) then you will need to reprogram
the board for elevon mixing. Whilst this can be
achieved inside your transmitter, the AS3X will
interfere with your controls, I.e. a sensed pitch
will be corrected with what it thinks is the
elevator and cause a roll!?
Using the SPMA3065 cable and the Spectrum
programming software you can easily create the
mixes, one for roll and one for pitch.
You will need to create a plug for the programming cable as the one on the adapter is the
wrong size. I simply use a spare micro servo plug.
Plug into the the programming port on the rx. The orange
wires should always be to the antenna side. Connect the usb
to your PC and plug in the models battery.
I won’t go into AS3X tuning here, there is plenty of
information from those more knowledgeable than me
online. I have the AS3X gains turned o
ff
.
Summary of Contents for Micro Velocity
