rc3Dprint Grumman X-29, Printing And Assembly Manual

Page: 10 / 24

3. T H E E L E V O N S N E E D T O B E I N P L A C E W H E N T H E
W I N G I S G L U E D T O T H E F U S E L A G E . A S S E M B L E T H E 3
A F T F U S E L A G E P I E C E S F I R S T . T H E R E I S A H O L E F O R
A N 8 M M T U B E T H R O U G H T H E F U S E L A G E P I E C E S T O
H E L P W I T H P O S I T I O N I N G . T H I S T U B E I S N O T
R E Q U I R E D F O R R I G I D I T Y T H O U G H A N D C A N B E
R E M O V E D A F T E R I T H A S H E L P E D W I T H P O S I T I O N I N G .
•
Assemble Fuselage 3 and 4 and glue them to the Aft Fuselage, again, using the 8mm tube
for positioning. You may want to check if you will be able to place your EDF in the cradle
with Fuselage 4 Attached to Aft Fuselage 1, if you not you may need to place it in first.
•
The wings are assembled around the main wing spar and elevon hinge spar. The servos
can be mounted with small screws, though it is advisable to also use a dab of hot glue to
keep them in position due tot he nature of LW-PLA.
•
The Tail Fins are simply glued into position.