UM-1097
Revision B
27
4.3.2.5
Display Alarm
Utilizing the display alarm feature in the System menu allows the ViewSmart 1600+ controller to force the
LCD to the Main Data or Zone screens when an alarm level is reached. This proves to be useful if a channel
or zone must be displayed when in alarm. The Main Data screen is the default alarm screen from the
factory. Turning this setting off means the display will not change screens when an alarm level is reached.
4.3.2.6
Warmup and Cal Purge Time
Warmup and Cal Purge Time are available to prevent unwanted alarm trips during these times. This time
can be adjusted up to five minutes for sensors that take a long time to warmup or drift back down after a
calibration.
4.3.2.7
Zone Screen Enabled
In some applications, all points are linked together in one large ZONE. In these applications the ZONE
screen does not need to be displayed. Turning Zone Screen Enabled to No causes scrolling through the
screens to skip the Zone screen.
4.3.2.8
Block Negative
This setting prevents negative channel values from being displayed, and applies to all channels.
4.3.2.9
Relay Refresh
The Relay Refresh selection allows reactivation of Acknowledged alarms after the time period expires.
This feature is used primarily to restart audible alarm devices after having been silenced by an
acknowledge function (via serial port or pressing the Alarm Reset button). An entry of 0 seconds
effectively disables the Alarm Refresh function. Maximum of 60 minutes is allowed.
4.3.3
Zone Names
Zones 1-8 names can be edited for a quick reference while in the zone screen. These 16 character names
show up in the title bar of each zone.
Z o n e 2
Z o n e 3
Z o n e 4
Z o n e 5
Z o n e 6
Z o n e 7
Z o n e 8
Z o n e 1
T a n k F a r m
We s t Ga t e
S w i t c h g e a r R o o m
C o n t r o l R o o m
Ma i n P r o c e s s
Z o n e 7
Z o n e 8
N o r t h E n t r a n c e
Z o n e N a me s
C o n f i g u r e
Z o n e N a me s
Mi mi c Mo d e
S D C a r d
V i e w E v e n t L o g
C l e a r E v e n t L o g
V i e w S e n s o r L i f e
V e r s i o n
~
~
~
~
~
~
~
v 1. 0 0
S y s t e m
Figure 20 Zone Names System Menu
Summary of Contents for ViewSmart 1600+
Page 77: ...UM 1097 Revision B 67 4 7 5 4 Programmable Relays Figure 47 Webpage Programmable Relays Menu...
Page 78: ...UM 1097 Revision B 68 4 7 5 5 System Configuration Figure 48 Webpage System Configuration Menu...
Page 134: ...UM 1097 Revision B 124 Appendix 4 Menu Navigation...
Page 141: ...UM 1097 Revision B 131 Wireless Options and Accessories Expansion Options...