1. Loosen swivel bolt.
2. Aim as desired.
3. Retighten swivel bolt.
1. Disconnect power.
2. Make sure fixture and lamp are cool enough to
touch.
3. Remove screws from front of lens and remove
lens.
4. Insert lamp base into socket so that pins in the
lamp are inserted securely into the socket(s).
5. Re-fasten lens to fixture.
AIMING
RE-LAMPING
CAUTION: Prior to installing, check that the lamp(s) is of proper type and wattage. Observe lamp manufacturer’s
recommendations on the lamp operation, ballast type and burning positions.
CAUTION: Be sure fixture temperature is cool
enough to touch. Be sure power is off.
Clean reflector and polycarbonate refractor with a cloth
moistened with non abrasive glass cleaning solution.
Check that:
1. Proper lamp is installed. Lamp is not faulty.
2. Line voltage at the fixture is proper.
3. Fixture is wired properly.
4. Fixture is grounded properly.
CLEANING
TROUBLE SHOOTING CHECKLIST
Swivel Screw
Lens
Socket
PLF13 AND PLF26 INSTALLATION INSTRUCTIONS
(
continued
)
Catalog #
Lamp and socket type
PLF13
13 watt Quad, GX23 base
PLF26
(2) 13 watt Quad, GX23 base
Toll free fax:
e-mail:
Send a fax to
888 722-1232
Tech Help Line:
Call our experts
888 722-1000
Visit our website for
product info
Easy Answers
rclighting.ca:
Get answers promptly
The designs of RC Lighting fixtures are protected under Canadian, U.S. and international intellectual property laws, © 2010 RC Lighting
