6
2. Stabilisator
Immobilize the building template on the building board. Make sur it is plane.
Insert the ribs in the template slots
Place the horizontal leading in ply 1mm edge and glue it !
Place the 3mm ply trailing edge and glue it
Place de elevator Leading edge and glue it
Place the elevator trailing edge and glue it
Place the balsa 8x3mm spar
Place stabilisator balsa leading edge and glue it
At that stage you may remove the stab from the template continue with the under side ot the stab.
Place the balsa 8x3mm spar
Remove carefully the building tabs under the ribs
Separate the stabilisator from the elevator by cuting in between the two vertical spars
Glue some 15 x 15 balsa blocks for the hinges
Glus some 15x15 basla on the leading edge fo te elevator and sand it round
The two elevators may be linked by a carbon tube later:
Or you may join the command line at servo side.
