45
Landing gear construction
In this section, you will attach a landing gear to an airplane. For the construction of the landing gear you will
need glue, sandpaper and a 2mm drill with a drill. A piece of wood for the drilling will also come in handy.
Take the carbon landing gear, laminate wheel holder and wheels. Enlarge the hole with a two-millimeter drill in
the laminate holder and in the wheel. Drill a hole on both edges of the carbon landing gear. The hole should be
about 4mm from the edge.
Summary of Contents for KS07
