RC Electronics RC Keyboard, Manual

Page: 4 / 4

Please connect the RC Keyboard unit to the RC Multi 3 via the micro USB connector, then apply power to
RC Multi 3.
Use ‘Down’ button to change pages, one press of the ‘Down’ button will bring you to the page where
you can set FXJ altitude, one more press the FXJ time, further pressing will take you to pages which are
just for information (Serial number, FW version, servo pulse, current altitude)
First use the ‘Down’ button to get to selected parameter where “ > ” will point to the parameter which
you wish to change. Then press Enter button and “ < ” will also appear (example: selected parameter for
altitude: Alt: >200m , edited value for altitude: Alt: >210m<
When value is between “ > < “, use the Up/Down button to change value, the ‘Height’ will change 10
meters each press and the ‘Time’ 5 seconds. To exit from edit mode press Enter button again and “ < ”
will disappear, the new value will be stored in the memory, then use the ‘Up’ button to return to the
start screen, un-plug the RC Keyboard and power down the unit and power up again for use.
December 2017 Version 1.0: Initial release