RBR#0008818revB
6
1.
2.
1.
2.
1.
2.
3.
1.
2.
3.
4.
3 Hardware
3.1 Opening and closing the instrument
.
Opening the instrument
with a standard end-cap
Twist the battery end-cap counterclockwise.
Once fully unscrewed, pull the end-cap away from
the housing.
.
Closing the instrument with a standard end-cap
Place the end-cap back on the instrument.
Twist the end-cap clockwise until aligned with
PAUSE
.
Open
instrument with a standard end-cap
Opening the instrument with a connectorised end-cap
Twist the battery end-cap counterclockwise.
Once fully unscrewed, pull the end-cap away from
the housing.
For instruments with connectorised end-caps,
unplug the umbilical cable.
.
Closing the instrument with a connectorised end-cap
Plug the mini-display port connector into the
instrument as shown.
Twist the end-cap counterclockwise two full
rotations to unwind the umbilical cable.
Place the end-cap back on the instrument.
Twist the end-cap clockwise until aligned with
PAUSE
.
Open i
nstrument
with a connectorised end-cap
Remember to keep the O-ring clean and avoid scratching the O-ring mating surfaces. Carefully inspect the O-
ring before deploying the instrument.
