R A Z O R B A C K O F F R O A D . C O M
7
Failure to follow the safety guidelines listed may result in voiding any applicable warranty, serious bodily injury, or death.
It is very important that you properly fill out your product registration form at
razorbackoffroad.com/product-registration/
to register your equipment. By submitting
the information within 15 days of your purchase, your warranty will be validated, ensuring that your equipment will be protected subject to the terms and conditions set
out herein. In the event we need to contact you concerning your registered equipment, Product Updates, Service Bulletins, or Product Recalls, the information you have
provided on the product registration form will ensure your immediate notification. Do your part and let us help you by filling out your product registration form.
Installation Instructions
The following are general instructions
for installation of the Polaris RZR
®
900 Rear Sliding Window (RBO4024).
Window Upper Assembly
Window Lower Assembly
Roll Cage ROPS Mounts
Fig. 1
!
!
ATTENTION
To remove the air filter cover, you may need to loosen the bolts on the
Window Lower Assembly and slide the assembly upwards.
It is the up to the installer to insure
that the rear window is securely
mounted.
Place “Window Lower Assembly” on
to the vehicle, on the outside of the
roll cage. It was designed to fit the
angles of the bed.
Before tightening the “Window
Lower Assembly” verify that it is
pushed down as far as possible.
(See Fig. 1)