R A Z O R B A C K O F F R O A D . C O M
11
Failure to follow the safety guidelines listed may result in voiding any applicable warranty, serious bodily injury, or death.
Failure to follow the safety guidelines listed may result in voiding any applicable warranty, serious bodily injury, or death.
It is very important that you properly fill out your product registration form at
razorbackoffroad.com/product-registration/
to register your equipment. By submitting
the information within 15 days of your purchase, your warranty will be validated, ensuring that your equipment will be protected subject to the terms and conditions set
out herein. In the event we need to contact you concerning your registered equipment, Product Updates, Service Bulletins, or Product Recalls, the information you have
provided on the product registration form will ensure your immediate notification. Do your part and let us help you by filling out your product registration form.
It is very important that you properly fill out your product registration form at
razorbackoffroad.com/product-registration/
to register your equipment. By submitting
the information within 15 days of your purchase, your warranty will be validated, ensuring that your equipment will be protected subject to the terms and conditions set
out herein. In the event we need to contact you concerning your registered equipment, Product Updates, Service Bulletins, or Product Recalls, the information you have
provided on the product registration form will ensure your immediate notification. Do your part and let us help you by filling out your product registration form.
FLAT
SURFACE
INSIDE OF RIM
TO
FLAT SURFACE
MEASUREMENT
- Set the tire you wish to mount on a flat surface with the inner side facing down.
- Measure from the flat surface to the bottom edge of the wheel’s central bore. This is the minimum length you will
need to have in order to mount your tire to your “IT FITS™” Adjustable Spare Tire Mount.
Fig. 1-3
Assemble the “It Fits™” Spare Tire Mount loosely with:
1/4” x 3/4” Hex Flange Bolt (1)
1/4” Flange Nylock Nut (1)
Do not tighten fully, the mounting arm should be able to
slide back and forth for adjustment in future steps.
Fig. 1-1 and Fig. 1-2
SET UP “IT FITS
™
” SPARE
TIRE MOUNT
TM
Fig.1-1
Fig.1-2
Fig.1-3