R A Z O R B A C K O F F R O A D . C O M
9
Failure to follow the safety guidelines listed may result in voiding any applicable warranty, serious bodily injury, or death.
It is very important that you properly fill out your product registration form at
razorbackoffroad.com/product-registration/
to register your equipment. By submitting
the information within 15 days of your purchase, your warranty will be validated, ensuring that your equipment will be protected subject to the terms and conditions set
out herein. In the event we need to contact you concerning your registered equipment, Product Updates, Service Bulletins, or Product Recalls, the information you have
provided on the product registration form will ensure your immediate notification. Do your part and let us help you by filling out your product registration form.
STEP 3
(STEP 3.1)
Place the assembled mount with the “IT FITS™” Mounting
Bracket against the location on the rack you wish to install
your “IT FITS™” ROTOPAX™ Mount to.
See Figure 3-1
(STEP 3.2)
Fasten ROTOPAX™ Mount to “IT FITS™” mount using 1/4” x
3/4” Phillips/Slotted Screws and 1/4” Nylock Nuts.
See Figure 3-2
(STEP 3.3)
With the screws and bolts in place RBO recommends using
an impact driver with a #3 Phillips attachment with a 7/16”
wrench to tighten down each Bolt and Nylock Nut to the
RBO Rack.
See Figure 3-3
Installation of the “It Fits™” Rotopax Mount to a rack:
Fig. 3-1
Fig. 3-2
Fig. 3-3
