RBH Sound S-10, Owner'S Manual

Page: 9 / 16

5. Phase Control:
This control changes the phase of the subwoofer. Changing the phase
will change the way the subwoofer and main speakers interact with each other at the
crossover frequency. Varying the phase position may result in more or less mid bass
depending on the phasing between the main speakers and the subwoofer.
6. Line Inputs: Line level input should only be used if no subwoofer crossover is being
utilized through the receivers’ bass management.
7. LFE In:
This input is used when connecting the subwoofer out from most surround
receivers or processors. Some receivers or processors may also name the subwoofer
output an “LFE” output or it might be called “Sub Out.”
8. Fuse Access: This is the power fuse access.
WARNING! In the event the fuse must be replaced, the replacement fuse
must match exactly the original fuse value. If the replacement fuse is not of
the same value, damage to the Subwoofer Amplifier may result.
CAUTION!
Before replacing the fuse, disconnect the power cord from the
power receptacle.
9. Power:
Power on and off switch.
10. LFE Out:
This RCA terminal is for “daisy chaining” to another subwoofer.
7
Subwoofer Amplifier Controls and Setup
(continued)