RBH Sound A-414, Installation And Instruction Manual, Page: 7 / 16

Rear Enclosure
The rear enclosure is a rectangular pre or post
construction acoustic foam box. The FB-W can
be mounted in-between standard 2x4 stud-frame
construction and enhances the sound quality of
in-wall speakers. It also diminishes the sound
from being transferred into rooms on the other
side of the wall. For post-construction install
simply fold lengthwise, push in hole and expand
inside then tack to studs.
Blank Plates
Blank plates are a very clean and efficient
way to cover the holes left in drywall when
a new construction bracket is used or a
speaker is removed. Install blank plates when
in-wall speakers will not be immediately
installed after drywall is finished.
New Construction Brackets
An excellent way to guarantee placement of
in-wall and in-ceiling speakers prior to drywall
installation, New Construction Brackets (NCB’s)
also make installation of in-wall speakers faster
and easier by reducing time and mess. Once
drywall is installed, just connect the speaker to
the speaker wire and install. New Construction
Brackets eliminate the time and need to locate
and cut drywall before speaker installation.
For more information on RBH Sound in-wall
speaker accessories go to www.rbhsound.com.
Speaker Accessories
Rear Enclosures
Blank Plates
New Construction Bracket
5