Spinner :
cut the edges of the spinner and backplate but leave a few mm standing for lining out the spinner
Place the spinner backplate formers with ca in the backplate with help from the 4mm dowels.
Make opening in spinner for your prop, the template gives a bit of lead to the shape.Place spinner to
backplate , now you see why the edges need to be there , the spinner edge rest on the backplate , this
is very precise drill holes to take the 2,2x9mm screws and screw the spinner to the backplate , it
should run straight now .. Yes ? else do it again .
Make the tail wheel assembly as per drawing , make the controls steering with z-bends , this is a dead
sure connection.
Place the canopy with ca , but first clean the canopy with window cleaner and use gloves , grease
makes the canopy fog , do not forget a pilot .
Place other vacuum formed parts as per drawing use ca and do sand the parts very well
