INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS
SYDNEY
|
MELBOURNE
|
BRISBANE
|
PERTH
|
AUCKLAND
Australia
1300 788 778 www.rba.com.au
|
New Zealand
0800 722 111 www.rbagroup.co.nz
2
Packing List
4 x C batteries not included
1.
2.
*Remove bottle and pump
assesmbly to refi ll
*Ensure pump & bottle are properly
replaced after refi lling
***For Battery recycling options in your area visit https://recyclingnearyou.com.au/
INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS
SYDNEY
|
MELBOURNE
|
BRISBANE
|
PERTH
|
AUCKLAND
Australia
1300 788 778 www.rba.com.au
|
New Zealand
0800 722 111 www.rbagroup.co.nz
3
Installation
Use screw fi xings provided.
If electing to use double sided tape [by others] to fi x to wall, RBA7730-999-006 Drip Tray cannot be
installed as unit will sit too far off the wall.
If installing to meet AS1428.1-2009 in a bathroom, ensure outlet of dispenser is 900-1100mm off the FFL
and compliant with all other aspects of the code.
Avoid excess humidity, refl ective surfaces and direct sunlight when installing.
Allow 400mm bench clearance under the dispenser
The installer/owner should assess of the potential risk of sanitiser being ingested by children and locate the
dispenser at an appropriate height and/or a supervised location.
Operation
Hold hand under dispenser for sensor operation. Do not remove hand until dispense operation is complete.
To refi ll bottle and/or clean inside unit, turn unit off and remove bottle assembly to avoid spillage Do not use
>75% alcohol sanitiser
Maintenance
Turn unit off and wipe with a damp cloth. Soft detergents can be used if necessary. Do not use bleach-
based or abrasive cleaning chemical.
Periodically clean the dispenser by pumping warm water through the unit
Indicator Light:
Green 5 Second Flash -
Normal Operation
Red 5 Seconds Flash
- Low Battery
Red 2 Second Flash
- Obstructed Sensor
TroubleShooting
Problem
Probable Cause
Solution
Unusual activation
Direct sunlight/ Highly refl ective
surface
Remove Direct/Bright light
Soap / Sanitiser does not
dispense
Batteries are loose or expired
Ensure correct battery installation
Replace batteries
Soap/Sanitiser bottle is empty
Refi ll
Sensor is obstructed
Remove obstruction
Blocked/Clogged nozzle
Incorrect Sanitiser being used
Confi rm the viscosity of sanitiser suits the type
of pump
Spare Parts
RBA7730-999-006
Drip Tray Kit
RBA7730-999-007
Stand
Kit
RBA7730-999-008
Replacement Bottle
RBA7730-999-009
Replacement Pump - Spray
RBA7730-999-010
Replacement Pump - Foam
RBA7730-999-011
Replacement Pump - Liquid/Gel
