Razorri PDK17A, User Manual, Page: 9 / 11

07
1) You can stop the kettle boiling or keep warm process at any time by pressing
2) There will be 37°F tolerance different from the setting temperature.
the “CANCEL” button.
NOTE:
Too little water will cause the kettle switching off before the water has boiled. If
you fill water over the maximum level, water may spill out of the spout when
boiling.
It is recommended to wait 30 seconds to re-boil water by pressing the power
switch again.
The kettle will not turn off if the switch is constrained or if the lid is opening.
Operate carefully when pouring water from your kettle as boiling water may
result in scald, besides, don’t open the lid while the water in the kettle is hot.
If the kettle enters standby mode, all display will turn off. To wake the appliance,
press any button.
Please do not open the lid and add water into the kettle during boiling process.
Always ensure to remove the kettle from the base before pouring.
Caution
!
9. Lift the kettle from the power base and carefully pour water.
NOTE:
When the kettle is replaced on the base within 2 minutes, it will continue the
working procedure. You don’t have to set it again.
Boil-Dry Protection
Should you accidentally let the kettle operate without water, the function of
boil-dry protection will automatically switch off the power. If this occurs, allow the
kettle to cool prior to filling with cold water before re-boiling.