Need Help?
Visit our website for replacement parts, product support, a list of authorized service centers in the US and customer service contact information
at
www.razor.com
. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer Service
contact information is listed at the back of this manual.
3
Remove contents from box. Remove the separators that protect the components from damage during shipping. Inspect
the contents of the box for scratches, or dents that may have occurred during shipping. Because the Razor Turbo Jetts
Electric Heel Wheels are assembled and packed at the factory, there should not be any problems, even if the box has a
few scars or dents.
MAKE SURE POWER SWITCH IS TURNED “OFF” AND BATTERY IS REMOVED BEFORE CONDUCTING ANY
ASSEMBLY OR MAINTENANCE PROCEDURES.
Estimated Adjustment and Set-Up Time
Allow up to 5 minutes for set up & adjustment, not including initial charge time.
Allow up to 3 hours for charge
(see page 6 for charging information).
WARNING:
DO NOT USE NON-RAZOR
PRODUCTS WITH YOUR
RAZOR TURBO JETTS
ELECTRIC HEEL WHEELS.
The Razor Turbo Jetts Electric
Heel Wheels have been built
to certain Razor design
specifications. The original
equipment supplied at the time
of sale was selected on the
basis of its compatibility with
the frame and all other parts.
Certain aftermarket products
may not be compatible and will
void the warranty.
Note: Razor Turbo Jetts
Electric Heel Wheels must be
moving at least 3 mph (5 km/h)
with the drive wheel engaged
with the ground before the
motor will start.
Product ID Locations:
(See locations to the left)
1. Inside of Motorized Side Of
Turbo Jetts. (Not Shown)
2. Battery
3. Charger
4. UPC Side of Box (Not Shown)
Box Contents:
• Razor Turbo Jetts Electric
Heel Wheels
• Charger
• Owner’s Manual
• Rubber Heel Insert
3.
Adjustable Ankle Strap
Non-Motorized Side
Motorized Side
Adjustable Ankle Strap
Adjustable Frame
Adjustable Frame
Motor
2.
1.
Drive Wheel
Charger
(Note: Charger design may
vary from one shown)
BEFORE YOU BEGIN
