background image

fail without fault of the manufacturer. Activities involving the use of
bicycles carry the risk of injury or death. 

9. Razor Limited Warranty and Registration

The manufacturer warranties this product to be free of manufacturing
defects for a period of 90 days from date of purchase. This Limited
Warranty does not cover normal wear and tear, tires, tubes or cable, nor
any damage, failure or loss caused by improper assembly,
maintenance, storage or use of the Electric Scream Machine. 

This Limited Warranty will be void if the product is ever:

used in a manner other than for recreation or transportation;

modified in any way;

rented.

Check local laws and regulations to see where you can ride your
Electric Scream Machine legally. 

The manufacturer is not liable for incidental or consequential loss nor
damage due directly or indirectly from the use of this product.

To obtain service under this warranty you must, within the
warranty period, contact Razor USA LLC directly by e-mail at
[email protected]. Razor will provide warranty replacement
at its sole discretion. 

Authorized warranty service is ONLY available from Razor USA
LLC.

19

IMPORTANT!

If your Electric Scream Machine has a problem

call Razor USA Toll Free (866) 467-2967

DO NOT RETURN TO STORE

Summary of Contents for ScreamMachine





















Reviews: