manualshive.com logo in svg

Razor RSF350, Owner'S Manual, Page: 6 / 16

Share
Download
Razor RSF350 Owner'S Manual Download Page 6

ASSEMBLY AND SET-UP

Need Help?

 Visit our website for replacement parts, product support, a list of authorized service centers in the US and customer service contact information 

at 

www.razor.com

. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer 

Service contact information is listed at the back of this manual.

4

 Attaching the Handlebars

Required Tool:

 6 mm Allen Wrench

 Attaching the Number Plate

1

 Place the handlebars in the handlebar clamps. 

1

 Slip the cables through the slit on the top of the number plate. Align the 

number plate with the holes on the fork and snap on the number plate.

2

 Align parallel to the fork and tighten the bolts using a 6 mm Allen 

wrench. When properly tightened, the handlebars should not move forward 

or backward. 

WARNING: 

Failing to 

properly adjust and tighten the bolts 

that affix the handlebars can cause 

you to lose control and crash.

Summary of Contents for RSF350

















Reviews:

No comments