background image

4

Need Help?

 Visit our web site for replacement parts, product support and a list of authorized service centers 

at 

www.razor.com

 or call toll free 866-467-2967

 

Monday - Friday 8AM - 5PM Pacific Time. Please have the 

product I.D. code (located on the bottom of the frame) available for better assistance.

check before riding

Using the 5mm Allen wrench, check that the collar clamp bolt is tightened securely. 

Note: 

If the handlebars are not properly aligned with the front wheel, loosen the bolt on the collar clamp and position 

the front wheel until it is perpendicular with the steering tube; retighten bolt on collar clamp to lock in place. 

q

 Collar Clamp

Wheels and Bearings

Under normal circumstances and conditions, Razor wheels and wheel bearings are maintenance free. Nonetheless, it 

is the responsibility of the owner or guardian to periodically inspect the wheels for wear and tear, the axle for proper 

tightness, and the bearings for side-to-side play and loose parts. When a wheel or wheel bearing develops play, this 

is an indication of excess wear and replacement is necessary. Replace immediately with only genuine Razor wheels. 

Worn wheels and bearings are considered normal wear-and-tear and are not covered by the Razor Warranty. Wheels 

other than genuine Razor wheels may not be compatible with your Rift™ caster scooter. The use of anything other than 

genuine Razor replacement parts may affect your safety and will void your warranty.

Cleaning Your Caster Scooter

Wipe with a damp cloth to remove dirt and dust. Do not use industrial cleaners or solvents, as they may damage the 

surfaces. Do not use alcohol, alcohol-based or ammonia-based cleaners, as they may damage or dissolve the plastic 

components or soften the decals or decal adhesive.

How to Ride

Place both hands firmly on the handlebars and hold the caster scooter in the upright position. Place one foot securely 

on the deck and the other foot on the ground for stability. When you are ready, carefully push off to begin the rolling 

action. Once in motion, the caster scooter can be ridden like any other kick scooter and because of its unique design, 

you can gain and maintain speed by swinging the back end in a back and forth “fishtail” motion. The caster scooter 

also allows you to carve/drift turns by adjusting the angle of your body from side to side. To learn all the different ways 

you can maneuver the caster scooter, Razor recommends you practice in a safe area free from obstructions before 

riding around others.

WARNING:

 Wheelies and 

other stunt-type riding reduces your 

ability to maneuver and control your 

caster scooter. Take the necessary 

precautions, such as wearing 

appropriate protective gear, and 

practice in an area free from 

obstructions.

Summary of Contents for Rift









Reviews: