background image

5

Using a 5 mm Allen wrench, check that the clamp bolts are tightened securely.

Check the pressure of your tires and inspect them for any signs of damage. 

Check your front and rear bolts to ensure they are tight.

Collar Clamp

tires

Wheels and Bearings

It is the responsibility of the owner or guardian to periodically inspect the wheels for wear and tear, the axle for 

proper tightness, and bearings for side-to-side play and loose parts. When a wheel or wheel bearing develops 

play, this is an indication of excess wear and replacement is necessary. Replace immediately with only genuine 

Razor replacement wheels. Worn wheels/bearings are considered normal wear and tear and are not covered by the 

Warranty. Other manufacturers’ wheels may not be compatible with your RDS scooter, may affect your safety and 

will void your warranty.

Cleaning your  Scooter

Wipe with a damp cloth to remove dirt and dust.

Do not use industrial cleaners or solvents as they may damage the surfaces. Do not use alcohol, alcohol-based or 

ammonia-based cleaners as they may damage or dissolve the plastic components or soften the decals or decal 

adhesive. To clean grip tape, use a wet coarse bristle brush to scrub any dirt stuck to the surface and let dry.

How to ride

Place one foot on the baseboard, push forward with the other foot. Steer. For enhanced cornering, lean slightly 

into the direction of the turn. For controlled stops, apply the brake by stepping on the rear fender/brake. Practice 

applying the brake at various speeds and in an open area free from obstructions before riding around others.

 Warning:

 

Wheelies 

and other stunt-type riding 

reduces your ability to maneuver 

and control your scooter. Take 

the necessary precautions, 

such as wearing appropriate 

protective gear and practice in 

an area safe for stunt riding and 

free from obstructions.

  CHeCk Before riDing

Summary of Contents for RDS









Reviews: