Razor POWER A 2 Quick Start Manual Download

Page: 2 / 4

Need Help?

Visit our website at

www.razor.com

or call toll-free at

866-467-2967

Monday - Friday 8:00am - 5:00pm Pacific Time.

Step 3

Step 4

Using a small flat screwdriver, remove the grommet

inside the opening of the deck.

Using a smal flat screwdriver, remove the C ring from the

folding mechanism pin. Slide the pin out from the frame.

Unfold the unit. Using a pair of long needle nose pliers,

remove the spring from the folding mechanism pin.

Using a 3 mm Allen wrench, remove the set screw at the

back of the folding knob while holding the knob.

Step 5

Step 6

Summary of Contents for POWER A 2

Page 1: ...ench CAUTION To avoid potential shock or other injury turn power switch OFF and disconnect charger before conducting any assembly or maintenance procedures Failure to follow these steps in the correct...

Page 2: ...he grommet inside the opening of the deck Using a smal flat screwdriver remove the C ring from the folding mechanism pin Slide the pin out from the frame Unfold the unit Using a pair of long needle no...

Page 3: ...00pm Pacific Time 3 Step 7 Step 8 Unscrew and remove the knob Slide down the plastic block of the folding mechanism Using a 5 mm Allen wrench loosen the bolt from the collar clamp and remove the stem...

Page 4: ...866 467 2967 Monday Friday 8 00am 5 00pm Pacific Time 4 Step 13 Reverse the steps ATTENTION Charge battery 8 hours before using Using a 3 mm Allen wrench loosen the screw from the quick release Slide...