POCKET ROCKET™
HANDLEBAR BOLT REPLACEMENT
Figure 1a
Using the supplied 5mm Allen wrench, remove
and discard the old bolts (see Figure 1a).
Step 1: Remove the old bolts
Figure 1b
Using the same 5mm Allen wrench, screw in the
new bolts with a washer and a lock washer (see
Figure 1b).
Step 2: Install the new bolts
Need Help?
Visit our website for additional video instructions at
www.razor.com
or call toll-free at
866-467-2967
Monday - Friday
8:00am - 5:00pm Pacifi c Time.
Figure 4a
Secure the new controller in place and tighten the
mounting screws (see Figure 5). Reattach plastic
cover to frame (see Figure 1a).
Step 5: Secure the new controller
Figure 5
Reconnect all plug-in connections (see Figure 4a).
Each connection point is unique, so the system can
only be connected in one way: the right way.
Note: If your existing controller has a 6-pin connector (see
Figure 4b), the replacement controller will require use of the
supplied adapter.
Step 4: Reconnect the wire connections
Figure 4b
2
