background image

13

Keep your MX350 running for years with genuine Razor parts. Visit our web site or e-mail us for more information on spare part availability.  

(Specifications subject to change without notice.)

 MX350 PARTS

1.  Handlebar end cap
2.  Grip, half length
3.  Speed control, twist grip
4.  Handlebar

Handlebar foam padding

6.  Handlebar pad cover
7.  Fender, front
8.  Brake lever with electric cut-off switch
9.  Grip
10.  M5x10mm flat head Phillips screw
11.  Number plate
12.  M8x45mm socket head bolt
13.  Handlebar clamp, upper
14.  Handlebar clamp, lower
15.  M6x30mm socket head bolt
16.  Washer, oversize
17.  Washer, 6mm, flat 
18.  M6 nylon lock nut
19.  Front fork assembly
20.  Washer, 8mm, flat
21.  Washer, 8mm, lock
22.  M8x20mm socket head bolt
23.  Fork crown, top plate
24.  Seat cushion
25.  Washer, 5mm, flat
26.  M5x14mm Phillips self-tapping screw
27.  Front cover
28.  Fender, rear
28.  Side plate
29.  Washer, 4mm, flat
30.  M4x14mm Phillips self-tapping screw
31.  M6x8mm flat head Phillips screw
32.  Fork leg cover, right
33.  M10 Nut
34.  Washer, 10mm, flat (1.5mm thick)
35.  Washer,12mm, flat (1.5mm thick)
36.  Bushing, front axle
37.  6001 bearing
38.  Axle, front (198mm)
39.  Bolt, steering (M10x182mm)
40.  Washer, 10mm, flat (2mm thick)
41.  Bushing, steering
42.  6202 bearings
43.  Bushing, inner steering
44.  Frame
45.  Wheel, front
46.  Tire and inner tube, front
47.  Fork leg cover, left
48.  Battery pad
49.  Bushing, swing arm
50.  Bolt, swing arm (M8x109.5mm)
51.  Block, foot peg
52.  Pin, 8mm DIA x 25mm long
53.  Foot peg, left
54.  Bearing spring
55.  Bearing
56.  M6x10mm 
57.  M5x6mm Phillips screw
58.  M6x30mm 

59.  Cover, tensioner wheel
60.  Screw, tensioner wheel
61.  M6x16mm screw
62.  Base, chain tensioner 
63.  Spring, chain tensioner
64.  Bushing, front wheel, inner
64.  606 Bearing
65.  Kickstand
66.  M8x20mm screw
67.  Washer, 8mm, lock
68.  Frame, rear fork
69.  Foot peg, right
70.  Pin, 12mm DIA x 89.5 mm long
71.  Shock absorber, rear
72.  M5x6mm flat head Phillips screw
73.  Chain guard, front
74.  M4x10mm Phillips self-tapping screw
75.  Motor
75.  Chain guard, rear
76.  M6x12mm screw
77.  Washer, 6mm
78.  Frame plug
79.  M6x18mm screw
80.  M6x10mm screw
81.  Electronic control module
82.  Washer, 4mm (half round)
83.  Spacer, rear wheel, right
84.  M6x14mm screw
85.  Arm, chain tensioner
86.  Freewheel
87.  Sprocket, rear
88.  Chain
89.  Axle, rear wheel
90.  Bushing, rear wheel, inner
91.  Wheel, rear
92.  Tire and inner tube, rear
93.  Drum, brake
94.  Bushing, brake, inner
95.  Brake assembly
96.  Spacer, rear wheel, left
97.  M5 lock nut
98.  Cable stop, brake
99.  M5x25mm screw
100.  Cover, charger port
101.  Charger port
102.  On/Off switch
103.  Battery cover, right
104.  M5x12mm Phillips screw
105.  Battery strap
106.  Battery (12V, 10Ah)
107.  Battery cover, left
108.  M4x16mm Phillips self-tapping screw
109.  Bushing, brake
110.  Pad, foam
111.  M6x16mm flat head Phillips screw
112.  Chain plate, outer
113.  Chain plate, inner
114.  Circuit breaker
115.  Frame cap

Summary of Contents for MX350 15128050



















Reviews: