background image

Turn power switch off before conducting any maintenance procedures.

1

 Untangle the wires and insert 

the steering wheel into the steering 

column. 

1

 Position the seat over the frame 

and align it with the holes in the 

frame. Align the safety belt anchor 

holes to the holes in the seat and 

frame with the lap/shoulder as-

sembly on the left and the receiver 

latch on the right. Insert the screws 

and tighten securely.

1

 To adjust the brake, thread the 

adjuster in or out 1/4 to 1/2 turns 

until the desired brake adjustment 

is attained.

The brake lever is fitted with a cable adjuster to compensate for cable stretch and/or to fine tune the lever movement 

to brake engagement.

2

 Using a 5mm hexagonal wrench, 

tighten the steering wheel bolts to 

the steering column.

2

 Install the shoulder belt anchor 

to the back of the seat. Insert and 

tighten securely.

2

 If the adjuster is threaded outward 

and the brake still has too much slack, 

use the auxiliary adjuster at the rear 

brake for additional adjustments.

Note:

 When properly adjusted, the brake 

lever will have approximately 3mm of 

free play before the brake engages.

3

 ASSEMBLy AND SET-UP

Attaching the Steering Wheel

Attaching the Seat

Adjusting the Brake

       WARNING:

  

Failure to 

properly install and tighten the 

screws, nuts and bolts that affix the 

steering wheel and seat can cause 

you to lose control and crash.

       WARNING:

  

DO NOT  

flip the Ground Force Drifter upside 

down to tighten steering axle bolts 

as it may damage control wires 

from the steering wheel.

       WARNING:

  

The 

safety belt arrangement supplied 

with the Ground Force Drifter is 

for “play” use only. It is not an 

ASTM-approved safety belt system 

and is not intended to function as 

an approved lap/shoulder/seat 

restraining device.

       WARNING:

  

Practice in 

an open area free from obstacles 

until you are familiar with the brake 

function. DO NOT RUN OVER ANY 

OBJECT AS IT COULD DAMAGE 

THE BRAKE OR DRIVETRAIN.

Need Help?

 Visit our web site for replacement parts, product support and a list of authorized service centers 

at 

www.razor.com

 or call toll-free at 866-467-2967 Monday - Friday 8:00 AM - 5:00 PM Pacific Time.

Summary of Contents for Ground force Drifter 25143400













Reviews: