2
BEFORE YOU BEGIN
Need Help?
Visit our website for replacement parts, product support, a list of authorized service centers in the US and customer service contact information
at
www.razor.com
. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer
Service contact information is listed at the back of this manual.
Remove contents from box and check parts against parts diagram found on page 6. Remove the separators that
protect the components from damage during shipping. Inspect the contents of the box for scratches in the paint or
dents that may have occurred during shipping. Because the FlashRider 360˚ Caster Trike was partially assembled and
packed at the factory there should not be any problems, even if the box has a few scars or dents.
Estimated Assembly and Set-Up Time
Allow up to 15-20 minutes for assembly.
WARNING:
DO NOT USE
NON-RAZOR PRODUCTS WITH
YOUR FLASHRIDER 360˚ CASTER
TRIKE. The FlashRider 360˚ Caster
Trike has been built to certain Razor
design specifications. The original
equipment supplied at the time of
sale was selected on the basis of its
compatibility with the frame, fork and
all other parts. Certain aftermarket
products may be compatible and will
void your warranty.
Product ID Locations:
(See locations to the left)
1. Frame (underneath unit)
2. UPC Side of Box (not shown)
Plastic Bag Contents:
• Tools
• Owner’s Manual
Required Tools
Two (2) 5 mm Allen Wrenches
(Included)
10 mm and 13 mm Wrenches
(Included)
Front Fork Assembly
Front Wheel Assembly
Steering Bolt
Spark Bar Handle
Seat
Rear Caster Wheels
1.
Spark Bar
Spark Cartridge Cover
Spark Cartridge
