set-uP
7
Repeat steps 5 and 6 to
attach the other rear wheel and
the 2 front wheels.
8
Flip the body assembly over.
9
Plug the hole on the front
board with the rubber ring.
10
Align holes on the handle
with the holes on the front
board and slide the handle axle
through to the other side.
11
Attach a fixed clip to both
ends of the handle axle to secure
the handle to the front board.
12
Position the front board
assembly to the body and
connect the wires from the
handle to the wires from the
body.
13
Feed the excess wires into
the opening on the main body.
14
Align the front board with the
main body. Lean the front board
slightly forward to hook the side
pegs (See arrows), then pull back to
the upright position while pushing
down on the front board until it
attaches securely into the main
body.
15
To attach the rear board,
lean board slightly forward,
then pull back while pushing
down until rear board is
attached securely to the main
body.
16
Attach the left side board. Make
sure side board is aligned properly
with the front and rear boards before
pushing down.
Note:
You may need to push against
the rear board in order to securely
attach the side boards into place.
17
Repeat step 16 for right side
board.
4
18
Attach umbrella/cup holder
and tighten knob.
