Razor E100 series Owner'S Manual Download Page 16

 E150 PARTS

Keep your scooter running for years with genuine Razor parts. Visit our web site or e-mail us for more information on spare part availability. 

(Specifications subject to change without notice.)

       1  Front wheel assembly
    1-1  Axle Nut
    1-2  Washer
    1-3  Washer
    1-4  Spacer
    1-5  SHCS
    1-6  Lock washer
    1-7  Ball bearing
    1-8  Wheel half
    1-9  Tire (same as 24-11)
  1-10  Center spacer front
  1-11  Wheel half
  1-12  Axle, front
       2  Grommet
       3  Fork
       4  Sleeve
       5  Steering bearing headset
       6  Wedge
       7  Quill/Folding stem lower part
       8  Washer
       9  Bolt, stem quill
     10  Thumbscrew w/ logo
     11  Screw, deck fixing
     12  Main deck board
     13  Screw, deck fixing
     14  Deck, upper plate
     15  Deck stabilizing washer
     16  Screw, upper deck fixing
     17  Grip, right side
     18  Brake lever
     19  T-bar
     20  Throttle, 1/2 grip
     21  Grip, left side 1/2 length
     22  Inflator extender valve
     23  End cover for grip
     24  Rear wheel assembly
  24-1  Axle, rear
  24-2  Nut
  24-3  Washer
  24-4  Cut washer
  24-5  Spacer, brake to frame
  24-6  Brake unit (backing plate and drum)
  24-7  Spacer, wheel to brake
  24-8  Wheel half, brake side
  24-9  Ball bearing, rear wheel

24-10  Center spacer rear
24-11  Tire (same as 1-9)
24-12  Wheel half, sprocket side
24-13  Lock washer
24-14  SHCS
24-15  Sprocket
24-16  Chain
24-17  Flat washer
24-18  Lock washer
24-19  Screw
      25  Screw, brake anchor
      26  Washer
      27  Spacer
      28  Washer
      29  Screws, motor mounting
      30  Motor, 24V
      31  Kickstand
      32  Screw
      33  Screw
      34  Chain guard
      35  Screw
      36  Cover
      37  Washer
      38  Screw
      39  Washer
      40  Nut
      41  Roller guide, chain tensioner
      42  Ball bearing for chain tensioner roller guide
      43  Spacer
      44  Washer
      45  Arm, chain tensioner roller
      46  Axle, chain tensioner roller
      47  Frame
      48  Switch, main on/off
      49  Circuit breaker
      50  Nut
      51  Spacer
      52  Spring for chain tensioner arm
      53  Bolt, chain tensioner anchor
      54  Battery box
      55  Charger input port
      56  Charger port cover
      57  Electronic control module
      58  Screw
      59  Battery set (2 x 12V)

15

Summary of Contents for E100 series

























Reviews: