1
2
3
4
5
Need Help?
Visit our website for replacement parts, product support, a list of authorized service centers in the US and customer service contact information
at
www.razor.com
. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer Service
contact information is listed at the back of this manual.
ASSEMBLY AND SET-UP
Collar Clamp
Required Tool:
5 mm Allen Wrench (included)
Using a 5 mm Allen wrench, check that the collar
clamp bolt is tightened securely. This item is
tightened and quality inspected at the factory,
but there is a slight chance that the effects of
shipping or handling may have caused the bolt
to loosen.
WARNING:
Failure to
properly install and tighten the
collar clamp may cause the rider
to lose control and fall. If you are
having diffi culty understanding
these instructions, please
contact Razor Customer Service
for assistance.
