TM
Pedal
Front
Connector
Note:
Failure to secure the steering
wheel can cause the steering wheel
to come out while riding.
x8
x6
4
ASSEMBLY AND SET-UP
Turn power switch off before conducting any maintenance procedures.
Attaching the Rear Caster Wheels and Stabilizing Posts
Tool Required:
Phillips screwdriver
Note:
Failure to secure the rear
wheels can cause the rear wheels
to come off while riding.
Note:
Failure to secure the
stabilizing posts can cause the posts
to come off while riding.
1.
Rear caster wheels. The curved edges of the caster
should be facing towards the back the Lil’ Crazy.
2.
Front stabilizing posts.
Attaching the Front Wheel and Steering Wheel
Tool Required:
Phillips screwdriver
1.
Insert front wheel assembly.
Note:
Make sure the connector is on the opposite side of
the foot pedal and the arrow is pointing towards the front
of the unit.
2.
Plug the white connector on the front wheel into the
white connector on the control module.
4.
Align the holes on the steering wheel with the holes
on the front wheel assembly. Re-insert the bolt and
tighten securely in place.
3.
Carefully turn unit over. Remove bolt from steering
wheel then insert the steering wheel onto the front wheel
assembly.
Make sure the arrow on the steering
wheel is pointing to the front.
Summary of Contents for Lil' Crazy
Page 2: ......