| For gamers by gamers™
CONNECTING TO AN AUDIO SOURCE
If this is the first time you are connecting to a Bluetooth device, your Razer
Hammerhead Pro V2 Wireless will automatically enter search mode when powered on.
If you have previously connected to a Bluetooth device, power on your earphones and
hold the multi-function button for at least
3 seconds
until you hear the search mode
tone.
1.
Set your earphones to search mode. While your Razer Hammerhead Pro V2
Wireless is in search mode, the LED indicator will alternately blink green and red.
[PLACEHOLDER IMAGE]
2.
Enable Bluetooth on your device and select “Razer Hammerhead Pro V2
Wireless” from the list of devices found.
[PLACEHOLDER IMAGE]
3.
Wait for pairing to complete. The LED indicator will change to static for 5 seconds
when successfully paired.
[PLACEHOLDER IMAGE]
If the earphones fail to connect to the device, LED indicator will alternately blink green
and red for a few seconds then power off after
5 minutes
. If this happens, simply
repeat steps 1 to 3 to try again.
[PLACEHOLDER IMAGE]
Once your earphones have paired with a Bluetooth device it will automatically try to
pair to that device every time your Razer Hammerhead Pro V2 Wireless is powered on.
