F O R G A M E R S . B Y G A M E R S .
™
9
FCC Part 15 Information and Notices
The FCC approved model meets the following requirements. This device complies with part 15 of the
FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
Note : This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications, However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help. Pursuant to Part 15.21 of the FCC
Rules, you are cautioned that changes or modifications not expressly approved by manufacturer could
void your authority to operate the device.
FCC regulations restrict the operation of this device in the 5.925-7.125 GHZ band for indoor use only.
For body operation, this device has been tested and meets FCC RF exposure guidelines when used
with any accessory that contains no metal and which provides a minimum separation distance of
5mm between this device and the body of the user. Use of other accessories may not ensure
compliance with FCC RF exposure guidelines.
Changes or modifications not expressly approved by the manufacturer could void the user's authority,
which is granted by the Federal Communications Commission, to operate this computer.
