Important Recommendations
•
Before turning on the equipment - Make
sure the voltage of the power source is the
same of the equipment.
•
Never use the equipment without the
protection device - as the cutting blade that
adjusts the length of the nylon line is
attached to it, avoiding overload and
consequent burning of the motor.
•
For longer life of the nylon line - avoid
putting it in contact with stones, walls,
fences and sidewalks.
•
Avoid dangerous environments - Do not
use the equipment in either humid or wet
places.
•
Never use metal cutting elements.
•
Never use the equipment in the rain.
•
After using the equipment, clean the air
inlets located on one side of the
equipment.
•
The motor used in the equipment is a
universal type. At every 300 hours check for
brushes (coal) wear out and if necessary,
substitute them. Look for the nearest
RAZAR
SHARP
technical assistance shop.
•
Keep children away - People, especially
children, must remain at a safe distance
from the working area. The operator or user
is responsible for accidents and for
exposing people to risky situations in his
property.
•
Dress properly - Do not wear loose clothes
or jewelry as they may be caught by the
movable parts of the equipment. It is
recommended to wear gloves and shoes
when working outdoors.
•
Wear goggles.
•
Use the equipment properly - Do not use
the equipment for tasks other than
intended. Only use the equipment as
described in these instructions and for the
functions specified.
•
Be ware of the extension cord - Always
keep the extension cord away from the
cutting area and obstacles. Keep it away
from heat, oil and sharp edge.
•
Frequently inspect the extension cord; do
not use insulation tape to mend it.
•
Do not force equipment - The equipment
will work better and safer when used under
the conditions specified.
•
Be alert - Pay attention to what is going on
around you. Do not use the equipment
when you are tired, distracted, or under the
influence of alcohol or drugs.
•
Never transport the equipment by the
extension cord.
•
Unplug the equipment - Whenever the
equipment is not being used or when
making adjustments.
•
Keep the equipment in good working
condition - When not being used, keep the
equipment in a dry place. Never use a water
jet to clean the equipment; clean them with
a sponge or cloth soaked in mild detergent.
If you need maintenance and spare parts, get
intouch with you local distributor or an
authorized technical assistant.
In case of further difficulties, get in touch with:
RAZAR
SHARP Inc.
1380 Monroe Street NW#105
Washington, DC 20010
[email protected]
www.razarsharp.com
Attention!
Read all the instructions in this manual
before operating the equipment.
Always observe and follow the safety
indications to prevent accidents and/or
injuries.
NOTAS
CONGRATULATIONS!
You have just purchased a quality product with
the highest technology developed by
RAZAR
SHARP
.
This product was designed to work quickly and
efficiently, providing total safety, at low cost.
Safety measures should be followed to operate
this equipment. The safety measures stated in
this manual do not cover all possible situations
which may occur during usage.
The operator must be aware that good sense,
attention and precautions cannot be
incorporated into the product, therefore
caution should be taken when operating and
servicing
RAZAR
SHARP
Ultra
Trimmer.
1
16
Manual Ultra Trimmer 12/17/09 5:33 PM Page 5
