RQD031ENr02 Rev. Date: 2021-12-16
12
3.3 Foot Support Adjustment
1. Remove plastic snap-pin from the foot support hanger tube.
2. Adjust the foot support extension tube vertically to achieve
the desired position.
3. Insert the snap-pin back through the foot support hanger
and extension tubes.
4. Repeat steps 1-3 for the other side.
4.0 USE AND OPERATION
4.1 Tilt Function
The Raz-ART tilts up to 40
o
to provide comfort and reduce
sitting pressure for the user. To tilt the chair, the attendant must
squeeze both tilt triggers and move the chair to the desired
angle. To lock the chair in place, the triggers are simply
released and the tilt mechanism will lock.
Note: It you experience difficulty releasing the tilt lock
mechanism by squeezing the triggers, gently rock the backrest
back and forth slightly to release the mechanism.
4.2 Casters
Each caster is equipped with a dual-lock feature, which stops
the caster from swiveling and rolling simultaneously. To activate
the dual-lock, step on the end of the caster lock pedal until it
latches in the “on” position. To deactivate the dual-lock, step on
the raised end of the dual-
lock until it latches in the “off” position.
4.3 Commode Pan
The Raz commode pan is designed with an elongated shape
that fits directly under the seat to minimize back splash. A
unique splash-reduction ridge is located at the center of the pan.
The high gloss surface facilitates cleaning and rinsing, while the
pouring spout and handle facilitate emptying. Removal of the
commode pan is achieved by sliding the pan rearward.
Note: When re-inserting the pan, ensure that the pan is guided into the
green plastic brackets and pushed forward until it hits the stops.
Hanger
Tube
Extension
Tube
