Raz Jaz-SP User And Dealer Manual Download Page 16

Jaz-SP User and Dealer Manual 

RQD030r00ENG   Rev. Date: 2019-07-24 

16 

 

4.0 

USE AND OPERATION 

 

4.1 Standard / Locking Armrest 

The armrests can be flipped up for ease of transfer. If locking 
armrests are ordered, the armrests will lock automatically when 
flipped down. Push the armrest lock in the back to disengage the 
locking mechanism. 
 

4.2  Adjustable Footrests

 

Adjustable Footrests are standard on the Jaz-SP. For transfers, the footrests can be flipped up, rotated 
away or removed entirely.  
 
To insert the Adjustable Footrests: 
1.  Place the footrest hanger tubes into the footrest receivers on the 

base frame. 

2.  If the hanger tubes are aligned forward, the notch on the hanger 

tube will engage with the pin in the base frame and lock in place. 

 

To adjust the length of the Adjustable Footrests: 
1.  Remove the snap-pin from the footrest hanger tube. 
2.  Reposition the footplate to a length suitable for the user. 
3.  Insert the snap-pin through the footrest hanger and through the 

inner tube. 

 

To rotate the Adjustable Footrests: 
1.  Lift the footrest hanger tubes to disengage the pin. 
2.  Rotate the footrests outward or inward. 

 

To remove the Adjustable Footrests, lift the footrests out of the receivers on the base frame. 

 

4.3  Commode Pan

 

The commode pan is designed with an elongated shape that fits 
directly under the seat to minimize back splash. A unique splash-
reduction ridge is located at the center of the pan. The high gloss 
surface facilitates cleaning and rinsing, while the pouring spout and 
handle facilitate emptying. Removal of the Commode Pan is achieved 
by sliding the pan rearward. 

NOTE: When re-inserting the pan, ensure that the pan is guided into 
the green plastic brackets and pushed forward until it hits the stops. 
 
4.4  Casters

 

Each Jaz-SP front caster is equipped with a dual-lock feature, which 
stops the caster from swiveling and rolling simultaneously. To activate 
the dual-lock, step on the end of the caster brake lever until it latches 
in the “on” position. To deactivate the dual-lock, step on the raised 
end of the dual-

lock until it latches in the “off” position. 

 

 

Summary of Contents for Jaz-SP




















Reviews: