Jaz-AP User and Dealer Manual
RQD026r00ENG Rev. Date: 2019-07-24
11
3.0 ACCESSORIES INSTALLATION: INTENDED FOR DEALER, DISTRIBUTOR OR
QUALIFIED WHEELCHAIR/SERVICE TECHNICIAN
3.1 Pelvic Strap Installation
Tool required: #2 Phillips screwdriver
1.
Insert the #10x¾” self-tapping screws through
the holes on the pelvic belt bracket and
thread into the seat.
2. Attach pelvic strap by looping through slot
on pelvic belt brackets.
3.2 Chest Strap Installation
Tools required: flat head screwdriver, 4mm hex key, 10mm wrench,
1. Remove the top plugs in the backrest with a
flat head screwdriver (if applicable).
2. Insert the M6x40mm button head screw
into the backrest and chest belt mounting
plate.
Hand tighten
the lock nut.
3. Repeat steps 1-2 for the other side.
a)
b)
4. Attach the chest belt by looping through
the slot on the chest belt mounting plates.
Fully tighten
the lock nuts.
