Rayvision RVH1004 User Manual Download Page 66

Page: 66 / 80

2010.01.22 411L User Manual V0.6(M02)

9-5.3 PTZ Control

In the main display, right click on the channel will bring up PTZ control panel as below.

PTZ communication protocols from different brands aren’t compatible 100% sometimes.

Therefore, some of these functions may be unavailable.

Icon

Description

8 direction key

Rotate the PTZ

ZOOM+

ୖ

Zoom in

ZOOM : Zoom out

Setup the PTZ spot as pre-set N.

FOCUS+ : Focus in

FOCUS-

ୖ

Focus out

Move to pre-set N.

Set PTZ Preset

Setup 16 pre-set N.

Goto PTZ Preset Move to specific pre-set N.

Activate auto pre-set tour

PTZ Sensitivity

Setup PTZ sensitivity

Setup the “start” and “end” of liner scan.

Activate the liner scan cruise.

Adjust the Brightness (Down is +)

Adjust the Contrast (Down is +)

Adjust the Sharpness (Down is +)

Summary of Contents for RVH1004

















































































Search results

Summary of Contents for RVH1004

Reviews:

Related manuals for RVH1004

Brands by name

Popular brands

Rayvision RVH1004, User Manual

Search results

Summary of Contents for RVH1004

Reviews:

Related manuals for RVH1004

Brands by name

Popular brands