Raytheon Pathfinder ECDIS, Operator'S Manual

Page: 272 / 370

Operator Manual
8 − 44
3655DOC020102 Edition: 30.MAR.2007
8.2.13.5 Reactivating Track Control
When you − after an interruption − are ready to reactivate track control, you can
open the Steer to Track dialog box and select a waypoint in the route as the
active waypoint you want to navigate to.
Procedure: (see Figure: 1 − 33)
Step 1 Select Track Control from the Routes menu.
(Alterative selection, place the Target Cursor on a waypoint and click
the [Query] button.
Select
Track Control from the menu box which appears)
Step 2 Move the cursor over the waypoint to which you want to navigate and
click, or use the left and right arrow keys at the top left hand corner of
the dialog box.
The following message will appear
indicated only
when NP20..
is installed
Step 3
Figure: 1 − 33 Steer to Track dialog box
Step 3 Click on OK . Track Control is reactivated.