Raytheon Pathfinder ECDIS, Operator'S Manual

Page: 248 / 370

Operator Manual
8 − 20
3655DOC020102 Edition: 30.MAR.2007
(7)
Cross − Track error (see Figure: 1 − 12)
Step 7.1 To enter a cross − track error, click in the XTD limit text box and
enter the cross − track in m.
Click on Set to make the change.
The fairlanes on the display will be adjusted according to the
cross
− track limit settings.
Step 1
Figure: 1 − 12 Enter a Cross − Track error
8.2.1.3 Entering Waypoint by Specifying Coordinates
Procedure: (e.g. using the pop up window per cursor)
Step 1 Place the cursor on a waypoint and click on [Query] button.
The pop up window appears.
Step 2 Select Change Primary Route entry.
Step 3 Select the action point Change .
NOTE
You must either enter a label and a turn radius before you place the
waypoint, or you can go through the Change Waypoint process to add
one later.