Raytheon Pathfinder ECDIS, Operator'S Manual

Page: 223 / 370

Operator Manual
Raytheon Anschütz GmbH
Germany
R
ECDIS
7 − 17
3655DOC020102 Edition: 30.MAR.2007
7.1.8 Anchor Watch
ECDIS can monitor the drift of the ship while anchored. When Own ship (DR
Point) travels outside the range, ECDIS gives an audible alarm and displays a
warning message.
Procedure : (see Figure: 7 − 11)
Step 1 Select the ship menu (see Figure: 7 − 1).
Step 2 Select Anchor Watch.. .. The dialog box appears.
Step 3 Click inside the Anchor Watch Enabled check box. The ship’s
current location appears beneath the check box.
NOTE
When you re − open the Anchor Watch dialog box, the displayed position
is the position of the ship when you enabled Anchor Watch. To re − set
the anchor watch to the current ship’s position, disable the Anchor
Watch Enabled check box, then re
− enable it
.
Step 4 Enter the range (distance from start position) for which you want
ECDIS to give a warning if crossed by own ship.
Step 3
Step 4
Anchor watch Range
Figure: 7 − 11 Anchor Watch Dialog Box