manualshive.com logo in svg

Raytheon Anschütz 108-010.NG001 E01, Operator'S And Service Manual

The Raytheon Anschütz 108-010.NG001 E01 Operator's and Service Manual is essential for anyone using this product. With its comprehensive instructions and guidelines, this manual ensures smooth operation and maintenance. Download this valuable resource for free from our website and unlock the full potential of your Raytheon Anschütz 108-010.NG001 E01.

Share
Download
background image

Magnetic Sonde

7 Installation and Maintenance

4423

26

Edition:003

Procedure

Fig. 11: Remove Holder with Magnetic Sonde

1

Gap

2

Glass Pane

3

Holder Plate

1. Turn the magnetic compass upside down, see related documentation.
2. Protect the magnetic compass from turning back.
3. Disconnect the magnetic sonde from the related system or equipment.
4. Position the operating tool to the gap (

Fig. 11

/1) between glass pane (

Fig. 11

/2) and

holder plate (

Fig. 11

/3).

 CAUTION!

Hazard due to too much pressure on the glass pane

Risk of material damage
• Avoid too much pressure to the glass pane.

 CAUTION!

Hazard due to damage the magnetic sonde

Risk of material damage
• Take care the holder with the magnetic sonde does not fall down.

5. Remove the holder from the glass pane by moving the operating tool carefully towards

the center of the magnetic compass.

Summary of Contents for 108-010.NG001 E01

















































































Reviews:

No comments

Related manuals for 108-010.NG001 E01

Radio Shack Digital Compass Owner'S Manual preview
Digital Compass
Brand: Radio Shack Pages: 24

Brands by name

Popular brands

Load more brands