ThermoView Start-up Application
Pi20
Rev. B 09/2011
27
6
-
The
T
hermoView
S
tart-up
A
pplication software
5
(TSA) is a simple and easy to use software program
that interfaces to the Pi20 camera (all variations). The software is provided free-of-charge on CD,
along with the operations manual. The intention of the software is to provide a basic imaging display
of the camera to allow the user to validate that all camera functions are operating properly. This
program is not intended to be sold or to provide significant functionality to make it useful in a process
control environment.
The functions of the software include the following:
Basic 320 x 240 image of the target in grayscale palette
Cursor movement on the image providing position and temperature
Temperature measurement in °F or °C
Emissivity adjustment of the entire image
Camera control
Calibration refresh performing a single point calibration on the camera
Capability to change temperature ranges of the Pi20LT camera
Read back of the following camera information:
a) internal temperature
b) detector stabilization error
c) internal data error
Selection of different cameras on the network (only one camera can be shown, however)
The user can change the IP address for the designated camera.
Temperature range selection for image display
Figure 13: TSA Screenshot
5
Copyright © Fluke Corporation. All rights reserved. Portions of this software copyrights © National Instruments Corporation.
