Appendix
Pi20
Rev. B 09/2011
55
Figure 25: ADAM-6000 Module under the ADAM.NET Utility Software
If network Firewall is enabled on your computer, you may not be able to connect with
your ADAM-6000 module. You need to add ADAM.NET Utility into the list of
exceptions. See section 9.4
Defining of Firewall Exceptions
page
4.
You need to change the IP address of the ADAM-6000 modules the same subnet with the host
PC. Type the correct <IP address>, <Subnet address>, and <Default gateway> on the status
display area
③
.
For more information on setting the host PC see section 5.8.1
Changing the Ethernet Settings
5.
When completed, click the <Apply Change> button
④
. A dialog box appears, asking you to
type the password. The default password of ADAM-6000 module is
00000000
.
①
③
②
④
