8.1.4 Taps
As its forerunner, TR-MARK III provides tap changer control.
The following Screens show a transformer with a fully filled info field. If you do not fill it out,
some shown information may not appear, but the screen keeps the same functionality.
NOTE
Please Check chapter ‘8.2.1.2 Taps’ for detailed information about how
to create a transformer with taps.
On the upper part of main screen, the actual tap step is displayed as a number. It is easy to
measure through several or all tap steps. Besides are buttons, to switch one step up or
down.
You may wish to know what for instance “tap 5” means in volts. Or you would like to switch to
the 22kV Tap. Both can be done easily by touching the ‘Actual Tap Step Number’ (-3).
In the following window tap number and corresponding voltage is displayed. To give you an
overview of all taps, a complete table with corresponding voltages is also available.
90100-2.20 Instruction Manual TR-MARK III 250V
Page 27 of 68
Actual
Tap Step
Up
Down
