5
Basic Steps
(Quick Installation Guide P1-21/ Detailed Guide P22)
STEP 1:
Safety
Information (Pg. 2)
STEP 2:
Wiring (Pg. 6)
Apply 24V DC to red and black cores of auxiliary cable and use standard CAT 5 or
better for data connection. Connect external inputs and external output wires as
required.
IMPORTANT:
Ensure 24V PSU are suitably rated
Ensure Cat 5 cable and auxiliary cable are correctly terminated and waterproofed after
installation
STEP 3:
Lens Selection and Physical Installation (Pg. 7)
Adjust interchangeable lens if required.
Fix to wall, pole or camera unit using U bracket provided or other Raytec bracketry.
IMPORTANT:
Ensure illuminator is rated to provide required viewing distances and select correct angle
Ensure illuminator is orientated in the correct direction
