25
Raytec Discovery Tool in Depth
The Raytec Discovery Tool can be obtained from the Raytec website. Once installed,
run the application and press
Discover
.
The Raytec Discovery Tool will discover and display all VARIO2 IP Illuminators on
your network.
The illuminator responds to multicast messages - and therefore does not need to
have a valid IP address in the same network range for the Raytec Discovery Tool to
find it. But it does require a valid IP address for connection and communication.
The Raytec Discovery Tool allows you to:-
•
Discover all illuminators on the network
–
illuminators do not need a valid IP
address to be discovered
•
Alter IP address of illuminator
–
it must have a valid IP address to allow
communication
•
Enable DHCP
•
Navigate directly to each illuminator
–
once a valid IP address has been
assigned
