2
•
Install in a well ventilated area
•
Do not stare at the illuminator for prolonged periods
•
IR Variants:
CAUTION - IR emitted from this product
–
Risk Group 2.
Avoid prolonged exposure or use appropriate shielding or eye protection. Risk
Group 2 for cornea / lens infrared hazard. At a distance of more than 1840mm
for all products the unit is in the exempt group.
•
White Light Variants:
Risk Group 2 Classification. Caution
–
Possible
hazardous optical radiation emitted from this product. May be harmful to
eyes, do not stare at the illuminator. Hazard distance is 1840mm.
Product Introduction
VARIO2 IP is a Network Illuminator designed to connect to a suitable network and is
provided with an integrated Web Interface. The Raytec Discovery Tool allows for easy
identification and connection to the illuminator or you can connect directly to the
illuminator via its IP address.
The illuminator has a CAT 5 cable for data connection, can be powered and is
supplied with a waterproof CAT 5 connector.
The illuminator has a photocell for automatic day/night switching and has an External
Input (to act as a telemetry, trigger input, volt free or TTL) and an External Output
(volt free output). It also benefits from Raytecs interchangeable lens system so that
the correct angle of illumination can always be achieved easily.
The illuminator has Operator and Administrator log-in and access rights. The
Operator has access to the Homepage and Diagnostic pages. The Administrator has
access to all pages.
An API is available for programmers for integration
within a VMS / BMS environment. The illuminator also
