11g Wireless LAN USB 2.0 Client Adapter
Version 1.0
17
bytes per second.
h
Link Quality:
In infrastructure mode, this bar displays the transmission
quality between an AP and a client. In Ad-hoc mode, this bar displays
the transmission quality between one client, and another.
h
Signal Strength:
This bar displays the strength of the signal received
from an AP or client.
h
Enable/Disable Radio:
Click on this button to switch on/off the wireless
radio.
h
Rescan:
Click on this button to rescan the environment for a better
signal/frequency.
h
Click
on
the
Apply
or
OK
button if you have made any changes.
3.2 Site Survey
The
Site Survey
tab displays a list of Access Points and Stations in the area, and
allows you to connect to a specific one. The following information is included in
this tab, as the image depicts below.
h
SSID
: displays the SSID of the Access Point.
h
LQ
: displays the link quality of the Access Point.
h
NT
: displays the network type, 11g or 11b.
h
C
: displays the channel number of the Access Point.
h
BSSID
: displays the MAC address of the Access Point.
h
W
: indicates whether WEP is enabled.
